// Blog //
Happy New Year and best wishes to you for 2023.
I have not set resolutions or goals for many years now, instead choosing creative challenges and completion of defined projects. Previously these have included the Piece a day challenge where I composed a piece of music everyday for a year and a half, and more recently 52 Fridays, where I wrote a piece of music and produce an accompanying video every Friday for a year.
I have created many binaural heads over the years since first learning about them during my undergraduate degree in the early 90s. Since then binaural has been a mainstay in my field recording methods, mostly using in-ear microphones in my own ears. I build binaural heads for various different projects as I like the DIY approach, and it can offer some great results. I have been (and still am!) very fortunate to have access to the Neumann KU-100 binaural head which as you would expect for the price (around £7000 in 2022!) is an exceptional piece of gear . Given the cost of the Neumann, I can't afford to own one without taking out another mortgage! Plus I think I would feel a bit worried about taking it out into the field!
That means making something that is a little bit quick and dirty (and fun!) and within the budget of my students. In the past I have made them using free mannequin heads that have been found discarded at the back of shops, or from going into certain shops that are having a refurb and asking if they have any lying around or broken. With a mannequin head, you do get more reflections due to the nature of the plastic, plus you also have to drill or cut into the mannequin's ears to insert the microphones.
For this project I have chosen to use a polystyrene head. The polystyrene head should be more absorptive and much less reflective particularly of high frequencies than a mannequin, but not as reflective as an actual head. I did think of putting a wig on to provide a small amount of realism and a very small amount more absorption but in the end I decided to put on a beanie…..because I had one and of course many of us walk around with beanies.
DIY Binaural Head with Soundman OKM microphones
Is the head around the right size? I haven’t had a chance to measure it properly, but it seems that it is a little bit smaller than the average human head, but most importantly it provides separation and its own unique HRTF.
I purchased all of the parts from Amazon (other stores are available!)
(**NB these are Amazon affiliate links)
Total cost £13.78
From my tool drawer I used a couple of strips of velcro and a few (quite a few!) dabs of superglue.
In this instance, I decided not to cut holes in the ears because I am going to primarily be using my faithful SoundMan OKM classic binaural mics as they fit into the ear canal like earbuds without needing to come from the other side. If this works well, I will get another set to cut a hole in to fit my DPA4060s in.
I had trouble sticking the ears to the polystyrene head and should really have thought of the porosity of the materials before attempting to glue them. The silicone ears don't retain glue very well and the polystyrene was very absorptive. In the end I did a bodge (the essence of DIY!) and by using Velcro as a base which I then superglued to both the ears and the head. There was of course a plus side of this bodge, not only did the ears attach firmly and securely, they are now fully removable, should I wish to do any further experiments with them in the future.
Overall, I'm really happy with the results of this binaural head and the recordings.
Example recordings
Soundman OKM Classic with Tascam DR100 MKIII
DPA 4060s with Tascam DR100 MKIII
Of course I am under no illusions (nor should I be given my background!) that this DIY set up is ever going to be as good as your own head, nor is it going to be as robust or precise as something like the Neumann head.
Then again that is not the point of this project…
The idea is to create a cheap binaural recording system which provides a basic HRTF (head related transfer function) and non-coincident separation between two microphones, which provide the listener with occlusion and interaural time and level difference. In which case, I think Billy (the head) works pretty well and I would encourage anyone who's thinking about experimenting with sound, field recording or sound design it to spend £15 (correct in 2022) on building your own DIY head of some form, sticking your mics in or on it see what you are able to record.
You could easily put Billy the Head in a bag and take him out for the day to do some nature or cityscape recording. The head is easily mountable on a tripod, all that would be needed would be to glue a base plate to the head to screw on to a tripod or of course it could just be rested on something.
I think you can have a lot of fun with the method, placing the head in unusual places, and experimenting with placement, mics, ASMR and much more. Remember field recording is a serious endeavour, but it's also supposed to be fun. We're supposed to have fun in our lives, so bring back some enjoyment to your recording, enjoy what you record, experiment and explore.
So here is a review of the Generic American Sound pedal, which I think is just really fantastic especially given that it costs less than £30.
https://youtu.be/v73H6RhfzXo
Filming
Camera (Canon M50)
Tripod (K&F Concept 60”)
Microphone (BOYA BY-M1 3.5 mm Lavalier Microphone)
Recording
Audio Interface (Focusrite Clarett 4Pre)
Microphone on amp (Shure SM57)
Microphone Amp Clamp (LD Systems SCBCLMP)
Amazon Affiliate link (Help support the site!)
KEEP IN TOUCH
Facebook:
Soundcloud:
LinkedIn
Here is the TrueTone 1 Spot CS6 Power Supply Review.
https://youtu.be/vfLCZ5IiJVc
Filming
Camera (Canon M50)
Tripod (K&F Concept 60”)
Microphone (BOYA BY-M1 3.5 mm Lavalier Microphone)
Recording
Audio Interface (Focusrite Clarett 4Pre)
Microphone on amp (Shure SM57)
Microphone Amp Clamp (LD Systems SCBCLMP)
Amazon Affiliate link (Help support the site!)
KEEP IN TOUCH
Facebook:
Soundcloud:
LinkedIn
Here we go! What do I think of the Line 6 HX Stomp after 3 months of recording and gigging. #pedablboard#gigging#hxstomp#guitarist
https://youtu.be/iJmfuMAwcoQ
Integrated midi from Boss MS-3 and also setting up midi controller changes on the to control effects blocks on the
GEAR LIST
Boss MS-3
Filming
Camera (Canon M50)
Tripod (K&F Concept 60”)
Microphone (BOYA BY-M1 3.5 mm Lavalier Microphone)
Recording
Audio Interface (Focusrite Clarett 4Pre)
Microphone on amp (Shure SM57)
Microphone Amp Clamp (LD Systems SCBCLMP)
Amazon Affiliate link (Help support the site!)
KEEP IN TOUCH
Facebook:
Soundcloud:
LinkedIn
LEARN
Here is a BONUS for you!! Download a FREE copy of my Guitar Creativity book, get it now while stocks last!. Thanks guys and the content will keep coming!
A little recording featuring the Aston Spirit Mic, certainly one of my favourite all time microphone! As ever using my trusty Fender Blues Junior!
https://youtu.be/htAQcA5r48Q
#guitar #recording #guitarist #musician
Amp (Fender Blues Junior III Tweed)
Aston Spirit Mic
Filming
Camera (Canon M50)
Tripod (K&F Concept 60”)
Microphone (BOYA BY-M1 3.5 mm Lavalier Microphone)
Recording
Audio Interface (Focusrite Clarett 4Pre)
Microphone Amp Clamp (LD Systems SCBCLMP)
Web: http://www.neilspencerbruce.com
Facebook: http://facebook.com/neilspencerbruce
Soundcloud: http://soundcloud.com/spencerbrucemusic
LinkedIn http://uk.linkedin.com/in/neilbruce
This video answers a viewers question about how I set the EQ on my Fender Blues Junior II tweed. Works for any amp! Try it out!
https://youtu.be/YqiC3bhoidk
GEAR LIST
Amp (Fender Blues Junior III Tweed)
Filming
Camera (Canon M50)
Tripod (K&F Concept 60”)
Microphone (BOYA BY-M1 3.5 mm Lavalier Microphone)
Recording
Audio Interface (Focusrite Clarett 4Pre)
Microphone on amp (Shure SM57)
Microphone Amp Clamp (LD Systems SCBCLMP)
Amazon Affiliate link (Help support the site!)
KEEP IN TOUCH
Facebook:
Soundcloud:
LinkedIn
LEARN
Here is a BONUS for you!! Download a FREE copy of my Guitar Creativity book, get it now while stocks last!. Thanks guys and the content will keep coming!
